Look at the hills around Lima and you'll see homes stacked up steep slopes, many built by families themselves with whatever materials they could afford. Some sit on loose sand, others on rocky ground, and many were built without an engineer ever visiting the site. Building on a slope is possible, but it brings challenges that flat ground never does.
Gravity, water and soil all behave differently on a hillside. A mistake that would cause a small crack on flat land can lead to settlement, sliding or collapse on a slope. In this article, you will learn the main challenges of building on a slope, the good practices engineers rely on, and how communities and local professionals in Lima work together to make hillside neighborhoods safer.
On a slope, soil and structures are constantly pushed downhill. Anything built there has to resist that force, through its foundation, its connection to stable ground or retaining structures.
Water is one of the biggest risks. Rain or wastewater that soaks into a slope adds weight and can weaken the soil. The Australian Geomechanics Society's hillside guide, prepared with support from Australia's national disaster mitigation program, recommends that roof and surface water be "piped away to a suitable discharge point rather than being allowed to infiltrate into the ground." It's a general Australian guide, not a Peruvian code or a design for any specific site, but the principle applies widely.
Flattening part of a slope usually means cutting into it or piling up fill. The same guide warns that "failure to compact the fill properly has led to settlement," which can continue for years and lead to cracking or landslides.
Rock, sand and loose soil each behave differently. Without knowing what's under a home, it's hard to know how it will respond to rain or an earthquake. That's why the first step on any hillside site is understanding the ground, not choosing the design. A structure that works well on rock may need a completely different approach on loose sand.
| Challenge | Good practice | Who decides |
|---|---|---|
| Unknown ground conditions | Site assessment by a geotechnical professional | Engineers |
| Water soaking into the slope | Collect and pipe water to a safe outlet | Engineers, with residents |
| Unstable cuts and fills | Engineered retaining structures and proper compaction | Engineers |
| Weak foundations | Foundations designed for the specific site | Engineers |
| Unsafe access | Staircases and paths designed for the slope | Engineers, with residents |
The Australian guide puts it plainly: "Don't cut corners on hillside sites – obtain advice from a geotechnical practitioner." Every slope is different, and decisions about foundations, walls and drainage should come from qualified professionals.
The same guide notes that retaining walls should be "engineer designed to withstand the lateral earth pressures and surcharges expected," with drainage behind them. Safe Homes has worked with communities on a retaining wall in Lima, designed and supervised by local engineers.
Many families in Lima's human settlements build their homes gradually, often without technical support. Heavy rains are rare in Lima, but during El Niño years they can bring flooding and mudslides to hillside neighborhoods. Our article on El Niño in Lima explains how these events affect settlements.
Safe Homes Movement, powered by MEDLIFE, works with residents on the hillside infrastructure they prioritize, such as staircases and retaining walls. Every project follows a 50/50 model: the community identifies the need and works on site, while local architects and engineers lead the design and supervise construction. Community leaders guide volunteers throughout the project.
On the development service learning trip, high school and college students join these projects in Lima, Cusco and Tena during summer, winter and spring. Over about a week, they spend four to five days on supervised field work and see firsthand why every slope needs its own plan.
Building on a slope shows how much engineering depends on understanding the ground, the water and the people who live there.
Fill out the form to get dates, eligibility details and next steps for the Development Service Learning Trip.
The main risks include soil movement, water soaking into the slope, poorly compacted fill, weak foundations and unsafe access. Each can lead to cracking, settlement or sliding.
Engineers assess the ground, design foundations for the specific site, plan drainage that carries water away and design retaining structures when needed.
Yes, on supervised projects. Volunteers help with tasks like carrying materials and mixing cement, while local engineers lead the design and supervise the work.